It’s fair to be concerned if your iPad is not charging when plugged in. If you connect to your iPad but the screen goes blank, this could be an alarm. However, before you contact Apple’s professional escorts, try out these quick solutions to see if they can assist you to meet your needs.
There could be a variety of reasons for this. It’s possible that the charger isn’t providing enough energy to your iPad. This could be a hardware failure.
For example, dirt or debris in the charging port on the base of your device may be blocking attach with the cable. It’s also possible that your cable has been damaged.
There could be a software issue. This could be due to a flaw in the iOS software.
Some simple ways to reconnect your iPad if it is not charging despite being plugged in include:
Solution # 01
Restart your iPad
When your iPad battery is not charging when plugged in, the very first move you should do is perform a factory reset.
It’s conceivable that the software on your iPad has collapsed, rendering the screen blank and your iPad unusable.
If this is the situation with your iPad, a hard reset will repair the software problem momentarily. If your iPad has a Home button, pressing and holding it together with the power button until you’ve seen the Apple logo appear in the center of the screen. You may have to hold both keys for up to 30 seconds on occasions.
If your iPad doesn’t have a Power button, tap and hold the sound up, sound down, and Top buttons till the Apple logo displays on the panel.
If your iPad says not charging when plugged it in after you’ve tried the first step, move on to the next step.
iPad not charging when plugged into the computer?
Don’t charge your iPad with your PC
iPads consume more power than tablets and phones such as iPhones, and many — maybe not all — pc’s lack high-power USB ports capable of charging an iPad. There’s no danger in giving it a shot; you won’t affect your iPad this way, but your computer is unlikely to charge your iPad properly. You can detect if a USB port isn’t capable of delivering enough power.
Update your iOS device
Your iPad has to be updated. You can do it quickly and without wires. To update your software, navigate to Settings > General > Software Update.
This troubleshooting solution can solve your iPad problem if it is not charging when plugged in
Examine your iPad’s Charger
If none of the other solutions work and you’re still having problems that your iPad is not charging when plugged in, try this one.
Read Also: Why Is My iPad Charging So Slowly?
iPadOS can identify power variations from the charger you’re utilizing. Those power irregularities can be viewed as a danger to your iPad’s health. Instead of continuing to move through, your iPad may simply cease charging.
Attempt to charge your iPad using a variety of chargers, including every USB port on your laptop and the wall charger that arrived with your iPad when you bought it.
If you’re anything like me, your surge protector may have a USB port integrated into it; give it a shot. If you notice that your iPad charges with certain chargers and not others, you’ve determined that the issue was with your iPad charger rather than the iPad itself.
If your iPad won’t charge no matter which charger you use, proceed to the next stage, that we’ll help you solve Lightning cord issues.
Examine the Charging Cable
After that examine the Lightning cable you’re just using to try to recharge your iPad. Is the Lightning connector or wire itself ragged or discolored in any way? If this is the case, a new Lightning cable may be required. Simply charge your iPad with an alternative Lightning cable to check whether it’s the cable that’s causing these problems. Get a cable from a friend if you don’t have one.
If your iPad charges with a different cable but not with yours, you’ve worked out why your iPhone won’t charge even when it’s plugged in. It’s not your iPad that’s causing the problem; it’s your charger or connector.
Check the iPad’s connection
Inspect your source of power if you’ve not already done so. We’ve recently mentioned that charging your iPad using a computer’s USB cable is unlikely, but if it has in the past but is not functioning now, make sure the computer is fully awake (not in sleep or hibernation mode).
You can indeed consider a better USB port if the one you’re using isn’t working. Plug it directly to a USB port on the PC rather than using a USB port included in a keypad or USB hub.
The best solution is to use a Charging cable to connect the iPad to a wall outlet. If you’ve been using a Charging cable the entire time, try borrowing one from a friend or utilizing the one that came with another USB-powered gadget. In addition, if the plug is “switched,” ensure the switching is set on and the plug is receiving power.
Is your iPad still not charging when plugged in?
If your charger or charging slot isn’t the problem, and your iPad is still not turning on when plugged in, and
If neither of those troubleshooting techniques restores your iPad’s functionality, it’s possible that the iPad’s hardware is malfunctioning. To get it repaired or replaced, go to an Apple shop.
If any of these fixes worked
If one out of all fixes worked and your device again starts charging then next time you don’t need to ask someone you will simply go with the above-mentioned fixes and thank us later.